How much vinyl flooring do I need?
Once you have settled on a Hana Flooring finish, the next question is a practical one: how much of it to order. Buy too little and you are chasing another box mid-install; too much and you have paid for a floor that sits in the store room. Here is how the sum works, and how we confirm the exact number for you.
How much vinyl flooring do I need?
The short version: measure your floor area in square metres, add about 10% for offcuts and wastage, then divide by the area one box covers. A Hana Flooring SPC (stone polymer composite) floor comes boxed by the square metre, so the maths is straightforward, but the figure that actually goes on your order depends on the layout and the shape of your rooms.
That last part is why we work out the final quantity with you rather than leaving it to a rough self-estimate: a miscount either stalls your install or leaves you paying for boxes you do not need. Send us your room sizes, or let us measure on site, and we confirm the exact number. Here is what goes into it.
How to measure your room
A good estimate starts with careful measuring.
- Length times width. For a rectangular room, measure the length and the width in metres; the area is one times the other. Measure right into doorways and alcoves where the floor will run.
- Odd shapes: split into rectangles. For an L-shaped or irregular room, divide it into rectangles, work out each one, and add them together.
- Whole home? Add up the areas of every room getting the same finish, then apply the wastage to the total.
If measuring feels fiddly, this is exactly the sort of thing we sort out on a free site visit, so you do not have to get it perfect yourself.
Why you add a wastage margin
You never lay a floor with zero offcuts. Planks are trimmed to fit at the walls, cut around corners and doorframes, and staggered so the joints do not line up, and all of that leaves offcuts too small to reuse.
For a standard straight layout, adding around 10% covers it. For a herringbone or a diagonal layout, allow around 15%, because the angled cuts waste more. It is also worth keeping one spare box aside after the job: a floating floor lets a fitter swap a single damaged plank later, and a matching spare is the easiest way to make that repair invisible, as our guide on protecting your floor explains. Judging the right margin for your layout is part of what we advise on.
What a box of Hana flooring covers
As a rough guide for your own planning, Hana’s flooring comes boxed by the square metre, and the coverage differs by series because the plank and tile sizes differ:
- Wood planks (Oak and Walnut): 10 planks per box, covering 2.196 m².
- Heritage Herringbone: 24 pieces per box, covering 1.786 m².
- Micro Cement: 6 large tiles per box, covering 5.017 m².
So a 20 m² living room in a wood finish, with 10% added, works out to roughly 22 m², or about 11 boxes of the Oak or Walnut series. Treat that as a ballpark; we confirm the precise count for your layout. Browse the finishes on our vinyl flooring range, or see one laid in a real room with the flooring visualiser.
The exact number, confirmed before you order
A ballpark is enough to plan and budget; it is not enough to order on. The real figure depends on your layout, the direction the planks run, how much has to be cut around each room’s shape, and whether you want spare stock kept back for future repairs.
So the last step is ours: we measure your floor on site, factor all of that in, and confirm the exact number of boxes, so you order once and order right. Start with a free measure and quote.
